6061-O və 6061-T6 alüminium təbəqə arasındakı fərq nədir??

6061-O aluminum sheet and 6061-T6 alüminium təbəqə are two common specifications of aluminum sheets in the 6000 seriyası 6061. Daha yaxşı xüsusiyyətlərə malikdirlər. 6061-O və 6061-T6 alüminium təbəqələr arasındakı fərq nədir?? 6061-O və 6061-T6 alüminium plitələr arasındakı əsas fərq onların mexaniki xüsusiyyətləridir, especially strength and hardness, which are affected by the tempering process.

6061-O aluminum plate:

Temperatur: O (annealed)

Mechanical behavior:
Dartma Gücü: Typically approximately 124 MPa (18 ksi)
Məhsuldarlıq Gücü: Typically approximately 55 MPa (8 ksi)
Uzatma: usually around 25%
Sərtlik: lower
Formalaşma qabiliyyəti: Excellent formability due to its softness. It can be molded, əyilmiş, and molded easily without cracking or weakening.

Typical uses:
Typically used in applications where high strength is not a critical requirement but formability and corrosion resistance are critical.
Ideal for applications requiring deep drawing or forming processes such as automotive parts, cans and kitchenware.

6061-T6 aluminum plate:

Condition: T6 (solution heat treatment and artificial aging)
Mechanical behavior:
Dartma Gücü: Typically approximately 310 MPa (45 ksi)
Məhsuldarlıq Gücü: Typically approximately 275 MPa (40 ksi)
Uzatma: usually around 12%
Sərtlik: Harder compared to 6061-O due to precipitation hardening process.
Formalaşma qabiliyyəti: Although still formable, 6061-T6 is less ductile than 6061-O due to increased strength and hardness. It may require more force to bend or form.

Typical uses:
Structural applications requiring high strength and good corrosion resistance, such as aerospace components, bicycle frames and structural components in construction.
Machined components requiring high strength and excellent machining properties.

Comparison Table: