화웨이 알루미늄 7 시스템
1. Supply products
우리는 제공할 수 있습니다 1 에게 8 series alloy aluminum sheet plates, and we can customize aluminum plates of various alloys, 크기, thicknesses and other rules.
2. Quality control of raw aluminum ingots
Aluminum ingots are all primary aluminum ingots produced from aluminum smelting and alumina electrolysis. The aluminum ingots meet the AOO standard, and the Chinese national standard (GB/T 1196-2008) should be called “aluminum ingots for remelting”. Each batch of aluminum ingots enters our smelting furnace, and we will take samples to determine the alloy composition and trace amounts. Elemental analysis.
The volume of the smelting furnace used in the casting-rolling production line is 60 톤, and we do an alloy composition analysis for every 30 톤. To ensure the stability of the blank alloy.
3. Production management process
After receiving your order, our production dispatcher will arrange the order, the workshop production will receive the production plan, and the production will be carried out. The quality inspector will check the quality in the intermediate link and give feedback to the quality control department.
Unqualified semi-finished products will not flow to the next link and stop loss in time.
4. QC operation process
We use smelting, semi-finished products and finished products for comprehensive quality control.
The special requirements of customers are decomposed into every link for control. Some customers need special alloys, high emphasis, high elongation, high surface hardness, surface brightness, fineness, 버전, cleanliness, We will decompose and control many special requirements in every link. To ensure that the finished product and the order requirements are consistent.
The quality inspection department has the right to veto the product quality throughout the company, and the quality inspection department directly reports to the deputy general manager.
If there are non-conforming products in your product, the manager of the QC department and the personnel involved in the inspection will have corresponding performance penalties.
5. Packaging process
The packaging of aluminum products is inseparable from wood, but also has a moisture-proof effect. 그러므로, our aluminum plates, 알루미늄 코일, 알루미늄 웨이퍼, aluminum foils and other products are packaged with more than three layers, 예를 들어, PVC+pearl cotton+waterproof kraft paper +PVC. Both wooden pallets and wooden boxes are treated in a harmless manner.
We fully consider the difference in temperature in different regions, 육상 운송, sea transportation and other transportation conditions.
All aluminum products, before packaging, we have to stand still and air-cooled, and wait for the temperature of the aluminum products to drop before packaging.
6. Warehouse and transportation loading process
After the product is packaged, it will be warehousing and transported from the packaging area to the finished product warehouse for sorting and placement. The finished product warehouse is a dry warehouse that is well ventilated, rain-proof and moisture-proof.
The stacking of aluminum plates is not allowed to exceed 6 layers, aluminum foil is not allowed to exceed 5 layers, and aluminum wafers are not allowed to exceed 2 layers. Each finished product has its own storage QR code, which is convenient to find him when it is shipped.
In order to ensure the accuracy of the incoming and outgoing quantities, the packaging of aluminum products entering the finished product warehouse is not allowed to be opened.
In the process of loading, whether it is a forklift or a crane, the loading is carried out one piece at a time to avoid damage to the pallet or wooden box during the loading process.
Trucks for inland transportation must be covered with a tarp before leaving the factory to prevent sudden rain from affecting the product packaging and quality during inland transportation.
After arriving at the port, they are directly unloaded from the truck and into the container. Special personnel will take pictures during the process of loading the container. After the container is loaded, it will be reinforced. After the reinforcement, the photo will be taken and the container will be sealed.
7. 애프터 서비스
귀사로 보내주신 제품이 품질에 문제가 있어 당사에서 검증한 경우, 우리의 솔루션은 다음과 같습니다:
- 스크랩 알루미늄을 현지에서 직접 판매, 그리고 그 차이에 대한 보상.
- 해당 상품이 반품된 경우, 우리는 당신에게 새로운 자격을 갖춘 제품을 재발행할 것입니다. 그 과정에서 발생하는 내륙운임, 반환 및 재선적을 위한 해상 운임은 당사가 부담합니다..
애프터 서비스의 원래 의도: 당신이 만족하는 한.
- 일부 아프리카 고객의 경우, 남미와 동남아시아, 우리는 고객이 공식 웹사이트를 만들 수 있도록 무료 웹사이트 디자인을 제공합니다.. 고객이 Google에서 제품을 검색할 때 공식 웹 사이트를 통해 고객에게 연락할 수 있기를 바랍니다..
- 우리는 고객이 시장 개발 전략을 설계하고 성숙한 시장 개발 모델을 고객에게 전달할 수 있도록 도울 수 있습니다..
- 고객의 딜러 보상 계획, 고객이 최고의 보상을 받을 수 있도록 지원합니다. 3 판매 우수 딜러 중국 출장, 서비스와 현지 지원을 잘하고 있습니다..
