Хөнгөн цагааны ялгаа 6065 And 6005–Хөнгөн цагаан 6065 Vs 6005
6000 цуврал хөнгөн цагаан 6005 болон 6065
Хөнгөн цагааны хайлш хоёулаа 6005 болон хөнгөн цагааны хайлш 6065 -д бага түгээмэл хайлш байдаг 6000 цуврал. The 6 цуврал хөнгөн цагаан металл нь цахиур, магни зэрэг элементүүдийг нэмсэн, -аас илүү бат бөх, зэврэлтэнд тэсвэртэй байдаг 1000 цувралын цэвэр хөнгөн цагааны хайлш. Тэдний дунд, хөнгөн цагаан 6065 болон 6005 are rare aluminum metals in the 6xxx series, and there are similar characteristics and differences between the two.
Юу вэ 6065 хөнгөн цагааны хайлш?
6065 aluminum alloy is a high-strength aluminum alloy, mainly composed of aluminum, магни ба цахиур.
6065 aluminum has high strength, and the service strength is usually between 300 MPa and 400 МПа, and the tensile strength is between 350MPa and 450 МПа.
6065 aluminum alloy is an aluminum alloy material with excellent performance and wide application.
6065 aluminum alloy can obtain good casting performance or processing plasticity, which is easy to make products of various shapes and specifications.
Тиймээс, it has strong applicability in many fields such as aerospace, shipbuilding, тээвэрлэлт, architectural decoration, electronic appliances, гэх мэт.
6065 aluminum alloy can increase its strength through heat treatment. Common heat treatment methods include aging treatment (6065 T6) and natural aging treatment (6065 T4).
Танилцуулга 6005 хөнгөн цагааны хайлш
Юу вэ 6005 хөнгөн цагаан? 6005 aluminum alloy is a medium-strength and high-corrosion-resistant aluminum alloy belonging to the Al-Mg-Si series.
Хөнгөн цагааны хайлш 6005 has good processing performance, welding performance and forming performance, and can be widely used in many fields.
6005 aluminum alloy has excellent welding performance and can be connected by a variety of welding methods, such as argon arc welding, resistance welding, laser welding, гэх мэт.
This also makes 6005 aluminum alloy easier to process and can be formed by cutting, drilling, milling, stamping and other methods.
6005 aluminum alloy has good corrosion resistance and has good stability to most common corrosive media such as air, water, acid, гэх мэт.
It can be well applied in outdoor and humid environments.
6005 aluminum alloy is closely related to 6005A хөнгөн цагааны хайлш, but it is not exactly the same.
The main difference between the two alloys is that the minimum percentage of aluminum in 6005 is higher than that in 6005A (but the maximum percentage is basically the same).
What is the difference between 6065 хөнгөн цагаан ба 6005 хөнгөн цагаан?
Хөнгөн цагаан 6065 vs 6005 chemical composition
Metal element composition table (%) |
Element | Ал | Кр | Cu | Fe | Mg | Mn | Тэгээд | -ийн | Zn |
6005 | 97.5-99 | ≤0.1 | ≤0.1 | ≤0.35 | 0.4-0.6 | ≤0.1 | 0.6-0.9 | ≤0.1 | ≤0.1 |
6065 | 97.5-99.5 | ≤0.1 | ≤0.1 | ≤0.35 | 0.05 | 0.05 | 0.3 | ≤0.1 | 0.05 |
Хөнгөн цагаан 6065 vs 6005 density difference
Density of aluminum | aluminum density in lb/in³ | density of aluminum kg/m³ |
6005 | 0.097 | 2700 |
6065 | 0.098 | 2720 |
Хөнгөн цагаан 6065 vs 6005 mechanical properties comparison
Mechanical Properties Comparison of 6065 vs. 6005 Хөнгөн цагаан |
Өмч | 6065-T6 Хөнгөн цагаан | 6005-T6 Хөнгөн цагаан |
Суналтын бат бэх | 265 МПа (38.4 ksi) | 295 МПа (42.8 ksi) |
Ургацын хүч | 225 МПа (32.6 ksi) | 255 МПа (37 ksi) |
Завсарлага дахь сунгалт | 10% | 12% |
Хатуу байдал (Бринелл) | 95 HB | 93 HB |
The difference between aluminum 6065 болон 6005 in usage
Өмч | 6005 Хөнгөн цагаан | 6065 Хөнгөн цагаан |
---|
General Use | Structural applications where moderate strength is needed | Applications requiring a balance of strength, зэврэлтэнд тэсвэртэй, and appearance |
Structural Components | Extrusions for bridges, towers, railings, болон хүрээ | Architectural applications, including window frames and door frames |
Transportation | Truck bodies, marine components, and railway car components | Унадаг дугуйн хүрээ, automotive parts, and recreational equipment |
Боловсруулах чадвар | Moderate; suitable for profiles requiring medium complexity | Сайн байна; often chosen when a combination of machinability and moderate strength is needed |
Зэврэлтээс хамгаалах эсэргүүцэл | Сайн байна; suitable for outdoor and marine environments | Маш сайн; ideal for outdoor applications needing long-term durability |
Дулааны эмчилгээ | Often supplied in T5 or T6 temper for enhanced strength | Often supplied in T6 temper for optimal strength and appearance |
Гагнах чадвар | Сайн байна, but may require post-weld heat treatment for optimal properties | Сайн байна; well-suited for welding, especially in thinner sections |
Appearance | Not typically chosen for high-appearance applications | Preferred when aesthetics and surface finish are important |
Common Applications | Furniture, ladders, and other structural applications | Sporting goods, bicycle frames, decorative trims, and automotive accessories |
Learn More:5052 vs 6061