ची समज 2024 अॅल्युमिनियम धातूंचे मिश्रण
2024 ॲल्युमिनियम प्लेट ॲल्युमिनियम-तांबे-मॅग्नेशियम प्रणालीमध्ये एक विशिष्ट हार्ड ॲल्युमिनियम मिश्र धातु आहे.
2024 aluminum sheet alloyयात उच्च सामर्थ्य आणि चांगली कटिंग कार्यक्षमता आहे, चांगली शक्ती आणि उष्णता प्रतिकार, परंतु खराब गंज प्रतिकार.
हे विमानाच्या संरचनेत मोठ्या प्रमाणावर वापरले जाते (त्वचा, सांगाडा, बरगडी तुळई, बल्कहेड, इ.), rivets, क्षेपणास्त्र घटक, ट्रक व्हील हब, propeller components and various other structural parts.
काय आहे 6061 aluminum plate alloy?
6061 अॅल्युमिनियम धातूंचे मिश्रण is a heat-treatable and strengthened alloy with good formability, वेल्डेबिलिटी, and machinability.
6061 aluminium sheet alloy
It also has medium strength and can maintain good strength after annealing.
The main alloying elements of 6061 aluminum alloy are magnesium and silicon, and they form Mg2S phase.
If it contains a certain amount of manganese and chromium, it can neutralize the bad effects of iron; sometimes a small amount of copper or zinc is added to increase the strength of the alloy without significantly reducing its corrosion resistance;
2024 aluminum vs 6061 composition difference
दोन्ही 2024 ॲल्युमिनियम मिश्र धातु आणि 6061 alloy are metals with high hardness and good corrosion resistance and pressure resistance. The reason is that the chemical elements contained in the two aluminum alloys are different.
ॲल्युमिनियम 2024 belongs to the AI-Cu-Mg system, आणि ॲल्युमिनियम 6061 belongs to the AI-Mg-Si system.
| Comparison of chemical composition of aluminum alloy 2024 आणि 6061 |
| मिश्रधातू | आणि | फे | कु | Mn | मिग्रॅ | क्र | Zn | च्या | इतर | अल |
| 2024 ॲल्युमिनियम | 0.5 | 0.5 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.10 | 0.25 | 0.15 | 0.15 | राहिले |
| 6061 ॲल्युमिनियम | 0.4-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | राहिले |
2024 aluminum vs 6061 price difference
Due to the copper content in its composition, 2024 aluminum alloy is more difficult to make plate ingots during production, with a higher failure rate, which results in an increase in its production cost compared to 6061 अॅल्युमिनियम धातूंचे मिश्रण. 2024 अॅल्युमिनियम धातूंचे मिश्रण, especially 2024-T351 model, has a higher hardness, which makes it difficult to roll with ordinary hot rolling mills. Due to production costs and technical limitations, the supply of 2024 aluminum alloy is relatively small, which naturally leads to its higher price.
The price of 2024 aluminum alloy plate is generally about RMB 20 per kilogram higher than that of 6061 aluminum alloy plate, while the price of cutting processing is more than RMB 40 per kilogram.
Which is better between 2024 aluminum plate and 6061 ॲल्युमिनियम प्लेट?
दोन्ही 2024 aluminum sheet and 6061 aluminum sheet have their own characteristics, and their characteristics vary depending on the application scenario.
2024 aluminum sheet is an aviation-grade aluminum alloy that is widely used in demanding industrial fields due to its excellent strength and hardness.
6061 aluminum sheet is a common aluminum alloy with good comprehensive properties and is suitable for a variety of machining and industrial applications.
The price of 2024 aluminum sheet is usually higher than that of 6061 aluminum sheet due to differences in its production cost and material properties.
If your application does not require extreme strength and hardness, 6061 aluminum sheet can meet the requirements and is more economical.
If your working environment requires the material to have higher strength and wear resistance, then 2024 aluminum sheet may be a better choice.
अॅल्युमिनियम धातूंचे मिश्रण 2024 आणि 6061 product types
 |  |  |
| 2024 6061 ॲल्युमिनियम शीट | 2024 6061 ॲल्युमिनियम फॉइल | 2024 6061 ॲल्युमिनियम कॉइल |
2024 aluminum vs 6061 यांत्रिक गुणधर्म
Comparison of mechanical properties of Aluminum alloy 2024 आणि 6061.
| मालमत्ता | अॅल्युमिनियम धातूंचे मिश्रण 2024 | अॅल्युमिनियम धातूंचे मिश्रण 6061 |
|---|
| Main Alloying Element | तांबे (कु) | मॅग्नेशियम (मिग्रॅ) and Silicon (आणि) |
| उत्पन्न शक्ती (0.2% offset) | 290-330 एमपीए (42-48 ksi) | 240-270 एमपीए (35-39 ksi) |
| Ultimate Tensile Strength | 400-470 एमपीए (58-68 ksi) | 310-350 एमपीए (45-51 ksi) |
| ब्रेक येथे वाढवणे | 10-20% | 8-18% |
| कडकपणा (ब्रिनेल) | 120-150 एचबी | 95-110 एचबी |
| थकवा शक्ती | ~140 MPa (20 ksi) | ~96 MPa (14 ksi) |
| लवचिकतेचे मॉड्यूलस | ~72 GPa (10.5 Msi) | ~69 GPa (10 Msi) |
| घनता | 2.78 g/cm³ | 2.70 g/cm³ |
| औष्मिक प्रवाहकता | 121 W/m·K | 151-167 W/m·K |
| द्रवणांक | 502°C (936°F) | 582°C (1080°F) |
| गंज प्रतिकार | Lower than 6061, prone to corrosion | उच्च, especially in marine environments |
| यंत्रक्षमता | Good but slightly more difficult than 6061 | उत्कृष्ट, better machinability than 2024 |
| वेल्डेबिलिटी | गरीब (due to cracking in the heat-affected zone) | उत्कृष्ट, widely used for welded structures |
| फॉर्मेबिलिटी | Fair, limited due to high strength | चांगले, excellent for complex shapes and extrusions |
| अर्ज | विमान संरचना, लष्करी अनुप्रयोग | स्ट्रक्चरल ऍप्लिकेशन्स, marine frames, ऑटोमोटिव्ह भाग |
