2024 aluminum alloy vs 6061 aluminum alloy The difference between high hardness aluminum alloys, corrosion-resistant high-strength 2000 series and 6000 letoto.

2024 Aluminium Alloy Vs 6061 Aluminium Alloy

2024 motsoako oa aluminium le 6061 aluminium alloy ke li-alloys tse peli tse nang le matla a phahameng le ho thatafala letotong la tšepe la aluminium, 'me li sebelisoa haholo lits'ebetsong tse ling tse hlokang litšepe tse matla haholo. Aluminium 2024 le aluminium 6061 e na le litšobotsi tse ngata tse tšoanang, mme ka nako e le nngwe, ho na le liphapang tse ngata pakeng tsa li-alloys tse peli.

2024 Aluminium VS 6061 Aluminium

Kutloisiso ea 2024 aluminium le 6061 aluminium

Selelekela ho 2024 motsoako oa aluminium

2024 poleiti ea aluminium ke motsoako o tloaelehileng oa aluminium o thata tsamaisong ea aluminium-koporo-magnesium. Its composition is relatively reasonable, its comprehensive performance is good, and it is a kind of hardness. Many countries produce 2024 motsoako, which is the largest amount of hard aluminum. The characteristics of Aluminum 2024 alloy are: matla a phahameng, certain heat resistance, and can be used as working parts below 150℃. The temperature is higher than 125℃

Matla a 2024 alloy is higher than that of 7075 motsoako.

The forming performance is relatively good in the hot state, annealing and new quenching state, and the heat treatment strengthening effect is significant, but the heat treatment process requires strict requirements. Corrosion resistance is poor, but it can be effectively protected by pure aluminum coating: cracks are easy to occur during welding, but special processes can be used for welding and riveting. Motsoako oa aluminium 2024 is widely used in aircraft structures, rivets, li-hubs tsa mabili a teraka, propeller components and other structural parts.

Selelekela ho 6061 motsoako oa aluminium

6061 aluminum alloy is a high-quality aluminum alloy product produced by heat treatment pre-stretching process. Magnesium and silicon alloys are added to it, which greatly improves the hardness. Although the strength of 6061 cannot be compared with 2xxx series or 7xxx series, it has many magnesium and silicon alloy characteristics, excellent processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, dense material without defects and easy to polish, easy to color film, excellent oxidation effect and other excellent characteristics.

2024 khahlano le 6061 chemical composition comparison

Aluminium 2024 le 6061 are both aluminum alloys with higher hardness, mainly due to the different element contents.

Reference:wikipedia

2024 aluminium vs 6061 aluminum basic characteristics

Motsoako oa aluminium 2024 (also known as LY12 aluminum alloy) le 6061 (also known as LD30 aluminum alloy), the two alloys are different in basic properties.

2024 motsoako oa aluminium:

It is a typical hard aluminum alloy in the aluminum-copper-magnesium system, with high strength and good cutting performance, empa ho fokola ha kutu.
It is usually supplied in T351 state, with good forming performance in hot state, annealing and new quenching state, and significant heat treatment strengthening effect, but strict heat treatment process requirements.
It has high strength and certain heat resistance, and can be used as working parts below 150°C. When the temperature is higher than 125°C, its strength is higher than that of 7075 motsoako.
It has good fatigue strength, but it is easy to crack during welding, and special processes are required for welding or riveting.

6061 motsoako oa aluminium:

It belongs to the Al-Mg-Si series alloy, with medium strength, good corrosion resistance, weldability and machinability.
The main alloying elements are magnesium and silicon, forming the Mg2Si phase, which gives the alloy artificial aging hardening function.
Widely used in various industrial structural parts that require certain strength and high corrosion resistance, such as trucks, tower buildings, ships, etc.
Excellent processing performance, easy to color film, and excellent anodizing effect.

2024 aluminium vs 6061 thepa ea mochini

2024 motsoako oa aluminium:

Tensile strength is high, usually around 470MPa, and conditional yield strength is around 325MPa.
It has good fatigue resistance.

6061 motsoako oa aluminium:

Tensile strength is moderate, usually between 241-500MPa (depending on different heat treatment states, such as T6, T651, etc.). Yield strength is also high, usually between 110-276MPa.
It has good toughness and elongation

6061 khahlano le 2024 application differences

2024 aluminium alloy

Mainly used to make various high-load parts and components, such as aircraft skeleton parts, skins, bulkheads, wing ribs, wing beams, rivets, etc.
Also used to manufacture truck wheel hubs, propeller components and other structural parts.

6061 aluminium alloy

Widely used in building profiles, irrigation pipes, vehicles, racks, thepa ea ka tlung, elevators, fences and other fields.
Also used to manufacture industrial structural parts such as trucks, tower buildings, ships, trams, and railway vehicles.

6061 le 2024 price comparison

2024 aluminum alloy price:

Due to its excellent strength and hardness, the production cost of 2024 is relatively high, so the price is usually higher.

6061 aluminum alloy price:

Aluminium 6061 has good comprehensive properties and is suitable for a variety of mechanical processing and industrial applications. The cost is relatively low and the price is more economical.