Differences Between Aluminum 6065 And 6005–అల్యూమినియం 6065 Vs 6005
6000 series aluminum 6005 మరియు 6065
Both aluminum alloy 6005 and aluminum alloy 6065 are less common alloys in the 6000 సిరీస్. ది 6 series aluminum metal has added elements such as silicon and magnesium, and has higher strength and corrosion resistance than the 1000 series pure aluminum alloy. వాటిలో, అల్యూమినియం 6065 మరియు 6005 are rare aluminum metals in the 6xxx series, and there are similar characteristics and differences between the two.
6065-Aluminium-Alloyఏమిటి 6065 అల్యూమినియం మిశ్రమం?
6065 aluminum alloy is a high-strength aluminum alloy, mainly composed of aluminum, magnesium and silicon.
6065 aluminum has high strength, and the service strength is usually between 300 MPa and 400 MPa, and the tensile strength is between 350MPa and 450 MPa.
6065 aluminum alloy is an aluminum alloy material with excellent performance and wide application.
6065 aluminum alloy can obtain good casting performance or processing plasticity, which is easy to make products of various shapes and specifications.
అందువలన, it has strong applicability in many fields such as aerospace, shipbuilding, రవాణా, architectural decoration, electronic appliances, మొదలైనవి.
6065 aluminum alloy can increase its strength through heat treatment. Common heat treatment methods include aging treatment (6065 T6) and natural aging treatment (6065 T4).
Introduction to 6005 అల్యూమినియం మిశ్రమం
ఏమిటి 6005 అల్యూమినియం? 6005 aluminum alloy is a medium-strength and high-corrosion-resistant aluminum alloy belonging to the Al-Mg-Si series.
6005 అల్యూమినియం మిశ్రమంఅల్యూమినియం మిశ్రమం 6005 has good processing performance, welding performance and forming performance, మరియు అనేక రంగాలలో విస్తృతంగా ఉపయోగించవచ్చు.
6005 aluminum alloy has excellent welding performance and can be connected by a variety of welding methods, such as argon arc welding, resistance welding, laser welding, మొదలైనవి.
This also makes 6005 aluminum alloy easier to process and can be formed by cutting, drilling, milling, stamping and other methods.
6005 aluminum alloy has good corrosion resistance and has good stability to most common corrosive media such as air, water, acid, మొదలైనవి.
It can be well applied in outdoor and humid environments.
6005 aluminum alloy is closely related to 6005A అల్యూమినియం మిశ్రమం, but it is not exactly the same.
The main difference between the two alloys is that the minimum percentage of aluminum in 6005 is higher than that in 6005A (but the maximum percentage is basically the same).
What is the difference between 6065 అల్యూమినియం మరియు 6005 అల్యూమినియం?
అల్యూమినియం 6065 vs 6005 chemical composition
| Metal element composition table (%) |
| మూలకం | అల్ | Cr | క్యూ | ఫె | Mg | Mn | మరియు | యొక్క | Zn |
| 6005 | 97.5-99 | ≤0.1 | ≤0.1 | ≤0.35 | 0.4-0.6 | ≤0.1 | 0.6-0.9 | ≤0.1 | ≤0.1 |
| 6065 | 97.5-99.5 | ≤0.1 | ≤0.1 | ≤0.35 | 0.05 | 0.05 | 0.3 | ≤0.1 | 0.05 |
అల్యూమినియం 6065 vs 6005 density difference
| Density of aluminum | aluminum density in lb/in³ | density of aluminum kg/m³ |
| 6005 | 0.097 | 2700 |
| 6065 | 0.098 | 2720 |
అల్యూమినియం 6065 vs 6005 mechanical properties comparison
| Mechanical Properties Comparison of 6065 vs. 6005 అల్యూమినియం |
| ఆస్తి | 6065-T6 అల్యూమినియం | 6005-T6 అల్యూమినియం |
| తన్యత బలం | 265 MPa (38.4 ksi) | 295 MPa (42.8 ksi) |
| దిగుబడి బలం | 225 MPa (32.6 ksi) | 255 MPa (37 ksi) |
| విరామం వద్ద పొడుగు | 10% | 12% |
| కాఠిన్యం (బ్రినెల్) | 95 HB | 93 HB |
The difference between aluminum 6065 మరియు 6005 in usage
| ఆస్తి | 6005 అల్యూమినియం | 6065 అల్యూమినియం |
|---|
| General Use | Structural applications where moderate strength is needed | Applications requiring a balance of strength, తుప్పు నిరోధకత, and appearance |
| Structural Components | Extrusions for bridges, towers, railings, మరియు ఫ్రేమ్‌లు | Architectural applications, including window frames and door frames |
| Transportation | Truck bodies, marine components, and railway car components | సైకిల్ ఫ్రేమ్‌లు, ఆటోమోటివ్ భాగాలు, and recreational equipment |
| యంత్ర సామర్థ్యం | Moderate; suitable for profiles requiring medium complexity | బాగుంది; often chosen when a combination of machinability and moderate strength is needed |
| తుప్పు నిరోధకత | బాగుంది; suitable for outdoor and marine environments | అద్భుతమైన; ideal for outdoor applications needing long-term durability |
| వేడి చికిత్స | Often supplied in T5 or T6 temper for enhanced strength | Often supplied in T6 temper for optimal strength and appearance |
| Weldability | బాగుంది, but may require post-weld heat treatment for optimal properties | బాగుంది; well-suited for welding, especially in thinner sections |
| Appearance | Not typically chosen for high-appearance applications | Preferred when aesthetics and surface finish are important |
| Common Applications | Furniture, ladders, and other structural applications | Sporting goods, bicycle frames, decorative trims, and automotive accessories |
Learn More：5052 vs 6061
