2024 aluminum alloy vs 6061 aluminum alloy The difference between high hardness aluminum alloys, corrosion-resistant high-strength 2000 series and 6000 సిరీస్.

2024 అల్యూమినియం మిశ్రమం Vs 6061 Aluminum Alloy

2024 అల్యూమినియం మిశ్రమం మరియు 6061 అల్యూమినియం మిశ్రమం అనేది అల్యూమినియం మెటల్ సిరీస్‌లో అధిక బలం మరియు కాఠిన్యం కలిగిన రెండు మిశ్రమాలు, మరియు అధిక బలం కలిగిన లోహాలు అవసరమయ్యే కొన్ని అనువర్తనాల్లో విస్తృతంగా ఉపయోగించబడతాయి. అల్యూమినియం 2024 మరియు అల్యూమినియం 6061 అనేక సారూప్య లక్షణాలను కలిగి ఉంటాయి, మరియు అదే సమయంలో, రెండు మిశ్రమాల మధ్య చాలా తేడాలు ఉన్నాయి.

2024 అల్యూమినియం VS 6061 అల్యూమినియం

యొక్క అవగాహన 2024 అల్యూమినియం మరియు 6061 అల్యూమినియం

Introduction to 2024 అల్యూమినియం మిశ్రమం

2024 అల్యూమినియం ప్లేట్ అల్యూమినియం-కాపర్-మెగ్నీషియం వ్యవస్థలో ఒక సాధారణ హార్డ్ అల్యూమినియం మిశ్రమం. Its composition is relatively reasonable, its comprehensive performance is good, and it is a kind of hardness. Many countries produce 2024 మిశ్రమం, which is the largest amount of hard aluminum. The characteristics of Aluminum 2024 alloy are: high strength, certain heat resistance, and can be used as working parts below 150℃. The temperature is higher than 125℃

The strength of 2024 alloy is higher than that of 7075 మిశ్రమం.

The forming performance is relatively good in the hot state, annealing and new quenching state, and the heat treatment strengthening effect is significant, but the heat treatment process requires strict requirements. Corrosion resistance is poor, but it can be effectively protected by pure aluminum coating: cracks are easy to occur during welding, but special processes can be used for welding and riveting. అల్యూమినియం మిశ్రమం 2024 is widely used in aircraft structures, రివెట్స్, ట్రక్ వీల్ హబ్‌లు, propeller components and other structural parts.

Introduction to 6061 అల్యూమినియం మిశ్రమం

6061 aluminum alloy is a high-quality aluminum alloy product produced by heat treatment pre-stretching process. Magnesium and silicon alloys are added to it, which greatly improves the hardness. Although the strength of 6061 cannot be compared with 2xxx series or 7xxx series, it has many magnesium and silicon alloy characteristics, excellent processing performance, excellent welding characteristics and electroplating, మంచి తుప్పు నిరోధకత, high toughness and no deformation after processing, dense material without defects and easy to polish, easy to color film, excellent oxidation effect and other excellent characteristics.

2024 vs 6061 chemical composition comparison

అల్యూమినియం 2024 మరియు 6061 are both aluminum alloys with higher hardness, mainly due to the different element contents.

Reference:wikipedia

2024 అల్యూమినియం vs 6061 aluminum basic characteristics

అల్యూమినియం మిశ్రమం 2024 (also known as LY12 aluminum alloy) మరియు 6061 (also known as LD30 aluminum alloy), the two alloys are different in basic properties.

2024 అల్యూమినియం మిశ్రమం:

It is a typical hard aluminum alloy in the aluminum-copper-magnesium system, with high strength and good cutting performance, కానీ పేద తుప్పు నిరోధకత.
It is usually supplied in T351 state, with good forming performance in hot state, annealing and new quenching state, and significant heat treatment strengthening effect, but strict heat treatment process requirements.
It has high strength and certain heat resistance, and can be used as working parts below 150°C. When the temperature is higher than 125°C, its strength is higher than that of 7075 మిశ్రమం.
It has good fatigue strength, but it is easy to crack during welding, and special processes are required for welding or riveting.

6061 అల్యూమినియం మిశ్రమం:

It belongs to the Al-Mg-Si series alloy, with medium strength, మంచి తుప్పు నిరోధకత, weldability and machinability.
The main alloying elements are magnesium and silicon, forming the Mg2Si phase, which gives the alloy artificial aging hardening function.
Widely used in various industrial structural parts that require certain strength and high corrosion resistance, such as trucks, tower buildings, ships, మొదలైనవి.
Excellent processing performance, easy to color film, and excellent anodizing effect.

2024 అల్యూమినియం vs 6061 యాంత్రిక లక్షణాలు

2024 అల్యూమినియం మిశ్రమం:

Tensile strength is high, usually around 470MPa, and conditional yield strength is around 325MPa.
It has good fatigue resistance.

6061 అల్యూమినియం మిశ్రమం:

Tensile strength is moderate, usually between 241-500MPa (depending on different heat treatment states, such as T6, T651, మొదలైనవి). Yield strength is also high, usually between 110-276MPa.
It has good toughness and elongation

6061 vs 2024 application differences

2024 aluminium alloy

Mainly used to make various high-load parts and components, such as aircraft skeleton parts, skins, bulkheads, wing ribs, wing beams, రివెట్స్, మొదలైనవి.
Also used to manufacture truck wheel hubs, propeller components and other structural parts.

6061 aluminium alloy

Widely used in building profiles, irrigation pipes, vehicles, racks, ఫర్నిచర్, elevators, fences and other fields.
Also used to manufacture industrial structural parts such as trucks, tower buildings, ships, trams, and railway vehicles.

6061 మరియు 2024 price comparison

2024 aluminum alloy price:

Due to its excellent strength and hardness, the production cost of 2024 is relatively high, so the price is usually higher.

6061 aluminum alloy price:

అల్యూమినియం 6061 has good comprehensive properties and is suitable for a variety of mechanical processing and industrial applications. The cost is relatively low and the price is more economical.