Differences Between Aluminum 6065 And 6005–Алюміній 6065 Vs 6005
6000 серія алюміній 6005 і 6065
Both aluminum alloy 6005 and aluminum alloy 6065 are less common alloys in the 6000 серії. The 6 series aluminum metal has added elements such as silicon and magnesium, and has higher strength and corrosion resistance than the 1000 series pure aluminum alloy. Серед них, алюміній 6065 і 6005 are rare aluminum metals in the 6xxx series, and there are similar characteristics and differences between the two.
6065-Aluminium-AlloyЩо 6065 алюмінієвий сплав?
6065 aluminum alloy is a high-strength aluminum alloy, mainly composed of aluminum, магній і кремній.
6065 aluminum has high strength, and the service strength is usually between 300 MPa and 400 МПа, and the tensile strength is between 350MPa and 450 МПа.
6065 aluminum alloy is an aluminum alloy material with excellent performance and wide application.
6065 aluminum alloy can obtain good casting performance or processing plasticity, which is easy to make products of various shapes and specifications.
тому, it has strong applicability in many fields such as aerospace, суднобудування, транспортування, architectural decoration, electronic appliances, тощо.
6065 aluminum alloy can increase its strength through heat treatment. Common heat treatment methods include aging treatment (6065 Т6) and natural aging treatment (6065 Т4).
Вступ до 6005 алюмінієвий сплав
Що 6005 алюміній? 6005 aluminum alloy is a medium-strength and high-corrosion-resistant aluminum alloy belonging to the Al-Mg-Si series.
6005 алюмінієвий сплавАлюмінієвий сплав 6005 has good processing performance, welding performance and forming performance, і може бути широко використаний у багатьох сферах.
6005 aluminum alloy has excellent welding performance and can be connected by a variety of welding methods, such as argon arc welding, resistance welding, laser welding, тощо.
This also makes 6005 aluminum alloy easier to process and can be formed by cutting, drilling, milling, stamping and other methods.
6005 aluminum alloy has good corrosion resistance and has good stability to most common corrosive media such as air, water, acid, тощо.
It can be well applied in outdoor and humid environments.
6005 aluminum alloy is closely related to 6005А алюмінієвий сплав, but it is not exactly the same.
The main difference between the two alloys is that the minimum percentage of aluminum in 6005 is higher than that in 6005A (but the maximum percentage is basically the same).
What is the difference between 6065 алюміній і 6005 алюміній?
Алюміній 6065 проти 6005 хімічний склад
| Metal element composition table (%) |
| елемент | Ал | кр | Cu | Fe | Mg | Мн | І | з | Zn |
| 6005 | 97.5-99 | ≤0.1 | ≤0.1 | ≤0.35 | 0.4-0.6 | ≤0.1 | 0.6-0.9 | ≤0.1 | ≤0.1 |
| 6065 | 97.5-99.5 | ≤0.1 | ≤0.1 | ≤0.35 | 0.05 | 0.05 | 0.3 | ≤0.1 | 0.05 |
Алюміній 6065 проти 6005 density difference
| Density of aluminum | aluminum density in lb/in³ | density of aluminum kg/m³ |
| 6005 | 0.097 | 2700 |
| 6065 | 0.098 | 2720 |
Алюміній 6065 проти 6005 mechanical properties comparison
| Mechanical Properties Comparison of 6065 проти. 6005 Алюміній |
| Власність | 6065-T6 Aluminum | 6005-T6 Aluminum |
| Міцність на розрив | 265 МПа (38.4 ksi) | 295 МПа (42.8 ksi) |
| Межа текучості | 225 МПа (32.6 ksi) | 255 МПа (37 ksi) |
| Подовження при розриві | 10% | 12% |
| Твердість (Brinell) | 95 HB | 93 HB |
The difference between aluminum 6065 і 6005 in usage
| Власність | 6005 Алюміній | 6065 Алюміній |
|---|
| General Use | Structural applications where moderate strength is needed | Applications requiring a balance of strength, стійкість до корозії, and appearance |
| Structural Components | Extrusions for bridges, towers, railings, and frames | Architectural applications, including window frames and door frames |
| Транспорт | Truck bodies, marine components, and railway car components | Bicycle frames, автомобільні запчастини, and recreational equipment |
| Оброблюваність | Moderate; suitable for profiles requiring medium complexity | добре; often chosen when a combination of machinability and moderate strength is needed |
| Стійкість до корозії | добре; suitable for outdoor and marine environments | Чудово; ideal for outdoor applications needing long-term durability |
| Heat Treatment | Often supplied in T5 or T6 temper for enhanced strength | Often supplied in T6 temper for optimal strength and appearance |
| Зварюваність | добре, but may require post-weld heat treatment for optimal properties | добре; well-suited for welding, especially in thinner sections |
| Зовнішній вигляд | Not typically chosen for high-appearance applications | Preferred when aesthetics and surface finish are important |
| Common Applications | Меблі, ladders, and other structural applications | Sporting goods, bicycle frames, decorative trims, and automotive accessories |
Learn More：5052 проти 6061
